树莓派安装seahub:Failed to sync seahub database.

服务器问题
1

Seahub is the web interface for seafile server.
Now let’s setup seahub configuration. Press [ENTER] to continue

Creating database now, it may take one minute, please wait…

/home/pi/Downloads/seafile-server-7.1.4
Failed to sync seahub database.

Error occured during setup.
Please fix possible issues and run the script again.

2

有没有大神或开发人员给指导一下哈。安装过程就出现这个，也没有说缺啥。

3

把树莓派换了个清华的源后完全更新了一下，然后再安装，都能安装成功了。seafile.sh运行启动正常，seahub.sh启动出现问题，报错如下：
pi@raspberrypi:~/seafile/seafile-server $ ./seahub.sh start

Starting seahub at port 8000 …
Traceback (most recent call last):
File “/home/pi/seafile/seafile-server/check_init_admin.py”, line 351, in
rpc = RPC()
File “/home/pi/seafile/seafile-server/check_init_admin.py”, line 284, in init
import ccnet
ModuleNotFoundError: No module named ‘ccnet’
pi@raspberrypi:~/seafile/seafile-server $ sudo apt-get install ccnet
正在读取软件包列表… 完成
正在分析软件包的依赖关系树
正在读取状态信息… 完成
ccnet 已经是最新版 (6.1.8-1)。
升级了 0 个软件包，新安装了 0 个软件包，要卸载 0 个软件包，有 0 个软件包未被升级。

但是我有安装ccnet的呀，为什么不行呢？

4

给权限运行也不行
pi@raspberrypi:~/seafile/seafile-server $ sudo ./seahub.sh start

Starting seahub at port 8000 …
Traceback (most recent call last):
File “/home/pi/seafile/seafile-server/check_init_admin.py”, line 351, in
rpc = RPC()
File “/home/pi/seafile/seafile-server/check_init_admin.py”, line 284, in init
import ccnet
ModuleNotFoundError: No module named ‘ccnet’

5

无语了，真是一波三折。
解决“ModuleNotFoundError: No module named ‘ccnet’”的办法如下：
修改seahub.sh 脚本第217行 : export PYTHONPATH=${INSTALLPATH}/seafile/lib/python3.6/site-packages:${INSTALLPATH}/seafile/lib64/python3.6/site-packages:${INSTALLPATH}/seahub:${INSTALLPATH}/seahub/thirdpart:$PYTHONPATH
将python3.6 改成python3.7
得到：export PYTHONPATH=${INSTALLPATH}/seafile/lib/python3.7/site-packages:${INSTALLPATH}/seafile/lib64/python3.7/site-packages:${INSTALLPATH}/seahub:${INSTALLPATH}/seahub/thirdpart:$PYTHONPATH

但是新问题又出来了
pi@raspberrypi:~/seafile $ sudo ./seahub.sh start

Starting seahub at port 8000 …

Error happened during creating seafile admin.

Seahub is started

Done.

pi@raspberrypi:~/seafile $

创建用户出错。。。

6

把conf里面的gunicorn.conf.py里面的bind 地址修改为192.168.0.98局网地址，虽然还是不能消除不能创建admin这个问题，但是能打开网页了
root@raspberrypi:/home/pi/seafile/seafile-server# ./seahub.sh restart

Stopping seahub …
Starting seahub at port 8000 …

Error happened during creating seafile admin.

[2020-08-19 06:42:42 +0000] [17728] [INFO] Starting gunicorn 20.0.4
[2020-08-19 06:42:42 +0000] [17728] [INFO] Listening at: http://192.168.0.98:8000 (17728)
[2020-08-19 06:42:42 +0000] [17728] [INFO] Using worker: sync
[2020-08-19 06:42:42 +0000] [17742] [INFO] Booting worker with pid: 17742
[2020-08-19 06:42:42 +0000] [17743] [INFO] Booting worker with pid: 17743
[2020-08-19 06:42:42 +0000] [17744] [INFO] Booting worker with pid: 17744
[2020-08-19 06:42:42 +0000] [17745] [INFO] Booting worker with pid: 17745
[2020-08-19 06:42:42 +0000] [17746] [INFO] Booting worker with pid: 17746

求解决方法！

7
8

这问题我也遇到过，这个ccnet是他写的一个py脚本在文件里面，你下载的文件不全,换个吧。